TapRite III Tapping Fluid | Threading Fluid
Advanced Formulation for Demanding Tapping and Threading
- Your first choice for the most severe tapping and threading ferrous metal applications
- Provides increased tap life and excellent lubricity
- Chlorinated oil/wax gel concentrate
- Clings to the tool, reducing waste; however, is easier to remove from parts and hands
- Low odor, ideal for all ferrous metals
- Use as is or dilute with mineral oils or spirits for less demanding applications
- Available in 16 oz. bottles and 1 gallon and 5 gallon pails
TapRite III may stain some aluminum alloys. Testing is recommended before use.
"I tap a lot of 4140, 1018 and D2. TapRite™ III clings to the tap much better than Moly-Dee and provides greater lubricity while increasing tap life, especially
in deep holes."
— Jim Martin, Martin Machine, Willoughby, Ohio
Replaces Moly-Dee™
Whether you are hand tapping a few holes or need that extra lubricity in your CNC threading operation, we have the right tapping fluid for your application.
ETNA Products
16824 Park Circle Drive, Chagrin Falls, Ohio 44023
Phone: 800-229-3862 / 440-543-9845 Fax: 440-543-1789
Copyright ©2024 ETNA Products, Inc. KOOLRite and SynMAX are trademarks of ETNA Products, Inc.
|
Protect Machined Products from Rusting
|
|
Protect Machined Products from Rusting
|
16824 Park Circle Dr, Chagrin Falls, Ohio 44023
Phone: 800-229-3862 / 440-543-9845
Fax: 440-543-1789
Copyright ©2024 ETNA Products, Inc. All Rights Reserved.
KOOLRite and SynMAX are trademarks of ETNA Products, Inc.