JTM Products has two lines of Cutting and Grinding straight oils. The first is Kut Rite. These products are designed to be general purpose, multi-metal, multi-operations fluids ranging from light to heavy duty performance. The second is the Lube Rite Swiss oils. These products are more specifically designed to be run in Swiss Machining Centers were precision on small parts is necessary. Read on to learn more about both lines.
JTM Product, Inc.’s Kut Rite family of cutting and grinding oils has been specifically designed to provide the optimum performance across a variety of different operational levels and viscosities. Straight oils are meant to be used in tougher operations where lubrication and extreme pressure properties are necessary.
|Kut Rite 1100||Low viscosity light duty oil that is designed to provide excellent wetting properties. Can be used in higher speed operations and swiss machines|
|Kut Rite 2200||Designed to provide good performance in light to moderate duty cutting applications, it can also be used as a dual or tri-purpose oil. The product is ideal for screw machines or any operation where this is a high probability of leakage.|
|Kut Rite 3300||Formulated to offer medium to heavy duty performance at a higher viscosity. The product has been fortified with lubricity and extreme pressure additives that are ideal for gear hobbing, gear shaping, threading, and tapping applications.|
|Kut Rite 4200 and 4210||Highly fortified heavy duty products designed to offer protection during even the most difficult machining operations including, but not limited to; pip threading, tapping, reaming, or internal broaching.|
|Appearance||Light straw||Amber||Amber||Straw||Light Amber|
|Viscosity @ 40 ºC, cSt||10||32||40||22||32|
|Viscosity @ 100 ºF, SUS||60||150||190||106||150|
|Specific Gravity at 15.6 ºC||0.91||0.93||0.95||0.97||0.97|
|Density, lbs / gallon||7.59||7.76||7.92||8.09||8.09|
The Lube Rite series of products provide quality swiss machining lubricants that are designed to enhance tool life and provide exceptional surface finish in high-precision metal removal applications. Lube Rite oils are formulated to prevent welding of the tool and work piece, resulting in improved surface finish.
|LubeRite Way Oil||22||15||22|
|Viscosity, cSt at 40 °C||22||15||22|
|Viscosity, cSt at 100 °C||5.9||4.5||4.24|
|Total Acid Number||5||5||0.28|
|Flash Point, °F||375||333||234|
|Specific Gravity at 15.6 °C||0.875||0.879||0.886|
Compared to mineral oil-based products, vegetable oil formulations can offer improvements in tool life, lubricity, and part finishes while providing a cleaner and safer work environment. It should be noted that vegetable oils do not perform well in the presence of moisture or water.
31025 Carter Street, Solon, Ohio 44139
Phone: 800-229-6744 / 440-287-2302 Fax: 440-287-3095
Copyright ©2022 JTM Products, Inc. KOOLRite and SynMAX are trademarks of JTM Products, Inc.